 |
|
NEW AND SURPLUS OPTICS We are authorised dealers of the famous Surplus Shed Optics. UK and EU customers can order any item here, with 14 day money back warranty from UK supplier. No Duties or VAT payable. US customers can also use this website to purchase direct from Surplus Shed, Fleetwood, PA with total $5.00 shipping charge to continental US! |
|
|
| | Home | | | Cameras | | | Adapters | | | Accessories | | | Lenses | | | Surplus Optics | | |
|
| | Return to Surplus Optics Home Page | | |
|
Mint condition, Burle TV Lens model #TC1849C. ES series, 50mm f/1.8 auto iris. High quality coated optics. Standard C mount. For 1-inch format cameras. Iris range from f/1.8 to f/360. 62mm diameter by 51mm long with 8 pin iris connector. Takes 49mm filters. Has level and ALC adjustments. Knurled ring focus adjustment. Front and rear lens caps included. Like new. |
|
|
Unused in original box with both front and rear lens caps. Quality TV lens made by D.O. Industries with un-terminated cable approximately 500mm in length. Wiring information is included. 2/3 inch format. Knurled ring focus adjustment. Has level and ALC adjustments and standard C mount. |
|
|
Standard c-mount lens made by Computar of Japan, model V1213. This has a 1 inch format. We have seen these selling online for as much as $60.00 and more. Focal length is 12.5mm, front clear lens diameter of 30.2mm (barrel is threaded inside 40.5mm for filters), rear clear lens diameter of 16.8mm (flange is 17.526, mount is 25.4mm). Three leaf knurled iris adjustments from f/1.3 to f/16 (closed), focuses from 1.3 feet to infinity. All elements are fully AR coated. The entire lens assembly is 58mm long. These are used but in excellent condition! |
|
|
Standard c-mount lens made by Cosmicar of Japan. This has a 1 inch format. Focal length is 12.5mm, front clear lens diameter of 26mm (barrel is threaded inside 40mm for filters), rear clear lens diameter of 14mm (flange is 19.5mm, mount is 25.4mm). Six leaf iris adjustments from f/1.4 to f/16 (closed), focuses from 1.3 feet to infinity. All elements are fully bluish/purple AR coated. The entire lens assembly is 53mm long. These are used but in excellent condition! |
|
|
This was originally used on an aerial camera. 3 inch focal length f/2.8. We believe these were made specifically for aerial camera production as we can find no information on this lens. Catalog number is 102105, also labeled REF 72314-780-122. Front clear lens diameter is 35mm, barrel is 48mm diameter. Rear clear lens diameter of 32mm, barrel is 40mm diameter. Looks to be 8 elements and all optics are fully AR coated (front element may have some coating break-up). The shutter is opened and closed with a lever on the back of the unit. The entire lens assembly is 50mm long and marked 'Lens made in West Germany'. The mounting plate measures 75mm x 55mm x 12mm thick and has four 4mm holes for mounting. Good luck finding this lens anywhere else! |
|
|
These come out of the KB-18A & B aerial cameras. The lens is a 3 inch f/2.8 Fairchild coated lens assembly (Our understanding is that Zeiss actually made these but the Zeiss name is not on the lens). Labeled 'Fairchild, Space and Defense Systems, El Segundo California'. Lens front clear diameter is 34mm, rear lens clear diameter is 32mm. Lens assembly is mounted in a rectangular steal base. The base is 75mm long by 57mm wide. This base fits to the shutter assembly. The shutter assembly is our item number M2984. The gear ratio of the motor is 100:1. Phase 1: 115VAC or Phase 2: 36VDC. There is a 14 pin connection that runs to the motor. There are 4 gears from the motor to the shutter assembly that makes the shutter open and close. When the shutter is all the way open it is 5.13mm high, when all the way closed it is 0.65mm. The shutter is enclosed with two stainless steel plates which total are 105mm long. The rest of the housing is anodized aluminum. There are four mounting holes and four legs with holes which housed the lens. The whole assembly is 117mm square. Great condition. |
|
|
Very similar to the Fuji Photo 6 inch Focal Length Metrogon lens that we sold out last year. This one does not have the manufacturer's name, but it's a beauty! Metrogon lenses are a 4 element design with very strong curved positive meniscus lens elements covering around a 90 degree field. They are used in aerial cameras for very large format film for the preparation of topographic maps. The 6 inch focal length lens covers at least a 9 inch x 9 inch format at f/6.3. Our understanding is that as the center aperture is made smaller (larger f number), the coverage format becomes larger. Some cameras had interchangeable center apertures for different film formats. Metrogon lenses use an anti-vignetting graded-density filter to hold back the central illumination while permitting the whole of the light to reach the edges of the picture area. Great lens for comet searching. In his book 'Star Gazing with Telescope and Camera', George Keene states on page 97 & 98 that the 6 inch f/6.3 Metrogon produces superb images. It gives point images over 45 X 60 degrees on a 5inch X7inch film and, when stopped to f/8, will even cover an 8inchX10inch plate. We understand these also make great projection lenses. This one is in new condition. Focal length is 6 inches. There is a center aperture but we dont know the f number. It has coated optics and a 117mm clear diameter anti-vignetting filter. These are complete with a 3 mounting hole flange (80mm diameter) and front and back protective lens covers. Assembly is 90mm long and 135mm diameter at the front and 62mm diameter in back. Front and rear lens elements are 45mm diameter. This was a rare find and will sell out fast as did the last ones we had. Unused |
|
|
This is an automatic 4 leaf shutter unit with a multi-coated lens assembly made for a camera. Has a mounted multi-element coated lens assembly with a 30mm focal length. Clear lens diameter is 13mm. Has a Seiko of Japan IR3S29BB integrated circuit which we believe to be a self timing chip and film speed sensor. We don't know what camera it was made for and don't have voltage requirements or other specs. Assembly is 2-15/16 inch long by 1-9/16 inch wide. Shutter opening is 17/32inch. Unused in original static shielding bag. Lens alone is worth more than our price for the entire assembly |
|
|
Made in Japan by F.P.O company. What a combination! A 50mm focal length f/5.6 CCD camera lens with a linear image sensor. The mount has a base that is 94mm long by 80mm wide. On two sides of the base are oval slots for adjustable mounting. The lens barrel is 75mm long by 42mm diameter. The lens front clear diameter is 16mm with violet coating. Beyond the mounting is a 22 pin 5000 bit CCD linear Image Sensor. This converts light to voltage. Consists of a 5000 bit photosenser array, two 2518 bit CCD charge transfer registers and an output amplifier. The peak response is 550nm green. The date rate is 24 megahertz high speed driving. Runs off of a 12DC single power drive. Instruction/data sheet for the Linear Image Sensor is included. Individually wrapped unused. |
|
|
This is an automatic 2 leaf shutter unit with a multi-coated lens assembly made for a camera. Has a mounted multi-element coated lens assembly with a 55mm focal length. Clear lens diameter is 12mm. Complete with 1 solenoid (6.3V 10uF), 2 cadmium sulfide photo electric light sensor that determines the exposure and tells the solenoids when to open and close and hence the shutter speed. Has a Mitsubishi of Japan M51081P 7200 integrated circuit which we believe to be a self timing chip and film speed sensor. We don't know what camera it was made for and don't have voltage requirements or other specs. There are 12 wire leads coming from four different areas. Assembly is 68mm long by 50mm wide. Shutter opening is 17/32inch. Unused in original static shielding bag. |
|
|
Made by Kodak of Rochester, NY. The case is marked Return to Hawk-Eye dept. 160. We believe that this lens was going to be a replacement to the original Hawk-Eye lens that was just a single meniscus. This lens assembly is an air-spaced doublet that has a 30mm focal length. The front and rear lens clear diameter is 20mm. The housing for this lens assembly is made of aluminum. The front housing outside diameter is 33mm. Right behind the front lip is 3 threads for mounting purposes. The threaded area has a diameter of 28.5mm. The optics were pressed into the housing with glue to seal the press ring to the housing. Unused! |
|
|
This f/1.4 Zoom lens assembly was made in Japan. The macro lens zooms smoothly from 10.5mm to 84mm. Focuses from 4.5 feet to infinity. This camera lens has the ability to auto focus. There is a switch along the one side that turns the auto focus on/off. There is a 12 pin adapter that will attach to your camera. Has 16 sided star iris. Front clear lens diameter is 50mm and rear clear lens diameter is 15mm. The optics has anti-reflective coatings. Optics look to be in good condition. Limited supply! |
|
|
This is the complete integrated lens and shutter assembly made for the Revere 35mm stereo cameras. Dual quality coated camera lenses made by Wallensak of Germany with iris control from f/3.5 to f/22. One turn of the control adjusts both lenses. Shutter speeds from 1/2 second to 1/200 second with B' and 'T'. Cock the shutter and release, both go at the same time. Coated optics. If you have ever wanted to build a 35mm stereo camera to take photos to use in your stereoscope, here's your opportunity. Or just get it for the two camera lenses, etc. Unused. |
|
|
Package says 'Element assy-adaptor lens reducing center Mitchell P/N AEF-124' Made by Mitchell Camera Corp. This is a 38mm diameter double concave lens with a focal length of -62mm. One side is strongly curved, and the other is slightly curved. 6mm thick at the edges. Unused. |
|
|
These were taken out of video cameras. Zooms smoothly from 12mm to 72mm. 52mm thread for filters. Has screw on rubber end piece. Focus from 4.3 ft. to infinity. Has motors, IC's, lots of electronic components and two side lens assemblies. Clear diameter of the front element is 43mm. Coated optics. |
|
|
Unused beauties. Lens set consists of two mounted lens assemblies that were designed to go onto either side of the iris/shutter assembly for one of the cameras. We don't have the exact specs or spacing. Coated optics. Front assembly is 2-1/8 inch diameter (clear lens diameter is 1-3/8inch diameter. Rear assembly is 1-3/4inch diameter (clear lens diameter is 1-1/4inch. Focal length is 160mm. Only have a few. |
|
|
Very similar to our sold-out L3020P zoom lens, these lenses feature 1 3/4inch front clear lens diameter, 9/16inch rear clear lens diameter, focus-adjustable barrel length from 4 3/8inch to 4 1/2inch x 2 3/16inch diameter (widest), adjustable focus from 3-30+ ft (0.8-10+ m), multi-element, with coated optics. Black-enameled aluminum barrel with focus and focal length grip rings. The assembly includes a three tab rear mount with 1/8inch diameter mounting holes, and attached actuator, motor, and shaft drive assembly connected to a molded gear ring in the barrel. Six wire power feed to the drive. In excellent condition. |
|
|
A small two-piece plastic assembly that may have been manufactured for use on small disposable cameras. Front clear lens diameter of 1inch, rear clear lens diameter of 7/16inch, with three clear plastic elements for color correction. The assembly measures 1 3/4inch long x 1 5/8inch wide x 7/8inch deep. Black plastic construction, with threaded barrel. Focal Length is 4-1/4inch from center of the assembly. Unused condition. Great inexpensive assembly for your optical projects! 5 are supplied at this price. |
|
|
45mm, f/2.8 Steinheil Anastigmat camera lens assembly. Coated optics. Made in Germany. Has iris adjustment and shutter speed adjustment. Looks like the slowest speed is about 1 second, but we don't have the equipment to determine the fastest speed. We don't know what camera this was made for or what film format, but at this price it will be great to experiment with. Assembly is 40mm diameter by 22mm deep. Clear front and rear lens diameter is 15mm. Steinheil made quality optics. |
|
|
This is the same as our L2084 except something doesn't work. Made for the Revere 35mm stereo cameras. Lenses are in mint condition but the shutter may not cock correctly, or both iris diaphragms may not move in tandem, or some other mechanical problem. Here's a great opportunity to get two good 35mm f/3.5 camera lenses with coated optics as well as a mechanical challenge for a very low price. |
|
|
Small camera lens. Has f stops from f/2.3 to f/22. Not sure what camera it was made for, but says 'WITTNAUR CHRONOSTAR'. Threaded mount is 16mm diameter which is smaller than the standard C mount. Assembly is 30mm long and 28mm diameter. Has knurled iris adjustment. One of our customers believes that this is the lens made for the Wittnaur Cine Twin 8mm camera/projector. |
|
|
If you have one of the old folding Ansco No. 2A or 3 cameras or the Folding Buster brown or V.P. Cameras then this is for you. Or get one for you collection of vintage camera accessories. The Portrait Attachment slips over the camera lens and in no way affects the operation of the camera, except that it enables the operator to work closer to the subject, thereby obtaining a larger and sharply defined image on the film. Barrel is 20mm diameter at the rear and 24mm diameter at the front. Clear lens diameter is 16mm. Unused in original box with instructions. |
|
|
Three element lens assembly with coated optics. Front lens clear diameter is 16mm, rear lens diameter is 8mm diameter. The front focal length of 40mm is taken from the center of the assembly. The front cell diameter is 22mm by 7mm wide. Rear element barrel is 13mm diameter by 4mm long threaded. On the threaded end fits the internal threaded mounting bracket. There are (3) 2mm holes for mounting. Total length of the assembly is 14mm long. These are Jaegers inventory labeled as 'Camera lens'. |
|
LINKS: DCI | OSWD | GOOGLE | CSS VALIDATOR
Copyright © Aquatic Zoo. Custom Software Development by Dot Com Infoway.
